STF, STE, Mega STE and other compatible models.
ACSI2STM hard disk emulator – without case
ACSI2STM hard disk emulator for Atari ST computers, including STF, STE and Mega STE, based on the open-source ACSI2STM project.
Compact ACSI2STM board with firmware version 5.00 from November 2024, described as 38% faster.
GemDrive mode is available for TOS 1.04, 1.60, 1.62 and 2.06.
ACSI mode is available for TOS 1.00, 1.02, 1.04, 1.60, 1.62, 2.06 and 3.x, covering ST, STF, STE and TT computers.
Mega STE: please note that the board blocks the VME slot.
The board connects to the external ACSI port on the computer.
In GemDrive mode, a microSD card formatted as FAT32 can simplify transfers between a PC and an Atari. Larger SD cards, such as 16 GB or 32 GB, can also be used.
There are 3 SD card slots.
A CR2032 battery (not included) keeps the time and date.
The board is ready to use. You need an SD card and a USB Type-C charger.
The project is open source and its documentation is available on GitHub. Refer to that documentation for ACSI mode; this board also supports that mode.
The last three photos show the board connected to an Atari STE.
SD cards, CR2032 battery and case are not included.
No customer reviews for the moment.
No customer reviews for the moment.
Reference: coqueacsi2stm
Brand: Amiga Vintage
3D-printed case for ACSI2STM.
Reference: Nappe5cm
Brand: Amiga Vintage
Amiga / Atari IDE ribbon cable for a hard drive or CF adapter.
Reference: CoqueGreaseweazleV4.1
Two-piece 3D-printed case. Case only; Greaseweazle adapter not included.
Reference: coqueacsi2stmp
Brand: Amiga Vintage
3D-printed case for ACSI2STM.
Reference: Pack-ideNapFlach4g
Brand: Amiga Vintage
4 GB flash storage kit (2.5-inch 44-pin IDE) for Amiga 600, 1200, Vampire boards, Wicher 500i and Atari Falcon 030. Includes: adapter + 5 cm ribbon cable + blank 4 GB CompactFlash card (no operating system).
Reference: Adpt
Brand: Amiga Vintage
Amiga / Atari 2.5-inch 44-pin IDE to CompactFlash adapter.
Reference: adpMicroSD
Brand: Amiga Vintage
Male 44-pin IDE to microSD card adapter.
Reference: Adpt+nappe
Brand: Amiga Vintage
Amiga 2.5-inch 44-pin IDE to CompactFlash adapter with IDE ribbon cable.
Reference: ACSI2STM
STF, STE, Mega STE and other compatible models.
Reference: coqueacsi2stm
Brand: Amiga Vintage
3D-printed case for ACSI2STM.
Reference: Greaseweazle V4.1
Greaseweazle V4.1 USB floppy disk adapter.
Reference: USB2ST_V2
Brand: Amiga Vintage
Connect a modern USB mouse to your Amiga or Atari ST with this DB9 Plug & Play adapter featuring a mode selector switch.
Reference: Pack-ideNapFlach8g
Brand: Amiga Vintage
8 GB flash storage kit (2.5-inch 44-pin IDE) for Amiga 600, 1200, Vampire boards, Wicher 500i and Atari Falcon 030. Includes: adapter + 5 cm ribbon cable + blank 8 GB CompactFlash card (no operating system).
STF, STE, Mega STE and other compatible models.
